Through the top of the solar panel into electricity, during the day light is converted into electricity by solar panels stored in rechargeable batteries, until dark at night (you can also block the solar panels by hand, so enter the evening mode), solar panels can not work When you charge the battery, the light will automatically turn on. This luminaire is suitable for use in courtyards, lawns, balconies, etc. It does not require wiring or separate power supply. It is automatically charged during the day and automatically light at night.
2 sensors: Light sensor and sensitive Motion sensor, save energy
Solar Powered, easy to install,no need pull wires, just screw the product to the wall.
Auto identify day or night,IP65 waterproof, heat-resistant solar lamp, suitable for most kinds of weather.
Switch inside for saving power during shipment
Great useful lighting for your garden, yard, aisle, porch, patio, driveway etc…
Charge by free sunlight and light in dark when people near around 10ft close
Green power, Green lighting
UV protect ABS body, never fade
|Item Name:||Solar LED Lamp|
|Emitted Color:||White (5000K-5500K)|
|LED QTY:||20LEDs/40LEDS COB|
|Solar panel:||0.55W/0.9W 17% efficiency|
|Li-ion battery:||1200mAh 2400mAh|
|LED Type:||2835 SMD/COB|
|LED Span Life:||50,000 hrs|
|Solar Charging Time:||8 hrs|
|Lighting Mode:||OFF/High Light|
|Led light sensor:||120 degrees/3m wide sensor range.|
|Protect function:||over charging, over discharging, over current, short circuit|
|Li-ion Battery Span Life:||500 circles|
|Solar Panel Span Life:||more than 5 years|
See buyer how to say
– Unlock and activate the device: Use the supplied key pin to click the on/off socket to unlock the battery and light.
– Install the device: Use the supplied expansion pillar-hinge and screws to install the light to where you want.
– Charging Via solar panel: Install the panel south facing in order to make sure there is enough sunlight.
1 x Solar PIR Motion Sensor Light
2 x Screws
1 x User Manual